 |
Apoxie®Sculpt |
Permanent -- Self-Hardening -- Waterproof
Model & Zimmermit completed by Joe Porter at www.cosmicbovine.com |
|
Zimmerit!
| Self-hardening, 2 part product (A & B) must be mixed thoroughly. Natural color & putty like feel. | Open working time about 1-3 hours. Cures hard overnight (24 hour full cure) & 0% shrinkage! |
| Strongly adheres to almost any clean surface . . . including ceramic, fiberglass, foam, glass, metal, plastics, resin, stone, wood, and more. | Can be seamlessly feathered before set-up, or sanded, tapped, lathed or otherwise tooled after. |
| User friendly clay. Non-toxic, non-flammable, non-hazardous. No solvents or fumes. | Clean up with water! |
Apoxie® Safety Solvent™
 |
Apoxie®Safety Solvent™ is recommended for tooling, smoothing, texturing, and quickly cleaning Apoxie®Sculpt from tools, brushes and model surfaces. Water clean-up only! |
Keep Apoxie® Safety Solvent in a closed container and sealed when not in use. Good ventilation should be used. Ventilation rates shall be matched to environment conditions. Wear rubber gloves, goggles or safety glasses when using Apoxie® Safety Solvent. Do not smoke or use Apoxie Safety Solvent near open flames. Do not dispose of Safety Solvent in an incinerator. Simple water clean-up recommended.
| ORDERING | ||||||||||||
|
||||||||||||
* Item Cost includes the price of the item and shipping costs to the selected destination only. Item cost doesn't include any other fees such as local and/or state taxes, import duties, etc. These are the responsibility of the purchaser.
|
